equipment Exhibition
Punching Module Group
Introduction
1. Top-class punching process efficiency (speed reaches 1600 time/minute), which can not only press various contours, but also realize many forming processes e.g. steel rolling, step rolling, louver, trimming and grinding, tapping and small-edge bending etc.
2. Equipped with active die to realize an up-moving molding, which can move upwards and downwards in the course of working to avoid scratching the back at maximum. Moreover, it is able to realize the large-size molding (maximum 100mm external diameter), and also marking at back (speed reaches 1400 time/minute).
3. All molds can realize 360° rotation without tool changing for the work-pieces with same appearance and different angles, which can enhance the unit output, significantly save mold use and reduce cost.
4. All molds can be prepared by synchronizing with production without shutdown for mold changing.
5. The maximum working thickness can reach 8mm.
6. The minimum work-piece is not limited to punching process, it can machine small work-pieces of various sizes. The work-pieces after machining can be sorted automatically.
7. It is installed with sheet bending monitor to ensure the reliability of machining process.
8. SheetMaster automation can realize the automatic unloading of work-piece without micro-connection, which can simplify the following machining procedures.
Technical Parameter TruPunch 5000 (S12)
| Machining Range | 2500x1250 mm/3000x1525 mm |
| Maximum Thickness | 8.0mm |
| Maximum Punching Pressure | 220 kN |
| Punching Speed | 1600 rpm |
| Maximum X Axial Speed | 100 m/min |
| Maximum Y Axial Speed | 60 m/min |
| X/Y Linkage Speed | 116m/min |
| Work-Piece Blanking | 500x500mm |
| Gentle Sheeting Working | Brush Table+Dynamic Molding |
| Automation | SheetMaster MF+LF |
Address: No. 14 Building, Jin Tan Holdings Zhongnan Gaoke Innovation Park, 1136 Chenfeng Road, Jintan District, Changzhou
Follow Us
